Sunbeam-Oster Flexible Coupling Machining System

The purpose of this system is to produce finished machined flexible couplings at the rate of 1,050 to 2,000 parts per hour.

The system is an eight station rotary indexing machine as follows:

  • Station #1: Automatically load two couplings into a dual fixtured nest.
  • Station #2:  Probe presence and position of the coupling.
  • Station #3: Drill two #13 (0.185) dia. holes, one in each part, with a two spindle drill head.
  • Station #4: Probe the presence of the tap drilled hole in each part prior to advancing to the tapping station. If either part is missing the drilled hole, neither part will be tapped and both parts will be unloaded as rejects.
  • Station #5: Tap two #12-32 holes, one in each part, utilizing a two spindle lead screw tapping head.
  • Station #6: All good, completed parts will be unloaded by a pneumatic pick and place device and placed into chute.
  • Station #7: All remaining parts will be unloaded into a reject tote pan. The fixture will be checked to assure all parts are removed.
  • Station #8: Idle.
Google+ link LinkedIn link

Hours:  Mon - Fri 8am – 5pm

7245 16th Street East , Suite 114

Sarasota, Florida 34243

Phone: (941) 351-6330

Proundly made in the USA
Robotics Value Provider using ABB robotics, programming and automation.
Partnered with AA Electric Control & Automation.
Parntered with AGI.
Partnered with RobotUnits.
Partnered with Rockwell Automation.
Partnered with Motion Industries.
Partnered with Swisslog.

Copyright © 2018-2020 Sunshine Automation & Tooling. All Rights Reserved. SUNSHINE AUTOMATION & TOOLING and its logo are trademarks and service marks owned by Sunshine Tool, LLC.   All other trademarks used on this site are the property of their respective owners. Site design and maintenance by www.DesignStrategies.com.