Once a production machine is purchased and put into operation, the value of that machine is obvious. Year after year the machine depreciates, further increasing its value on the books. As long as the machine continues to operate after the depreciation cycle the more value it has. Unfortunately with the obsolescence of components, the value diminishes quickly when parts to keep the machine in operation are no longer available. In some cases, the machines usefulness ceases for one part no longer available. We can rebuild it, we have the technology. In many cases we take old run down machinery strip it to the floor add new technology and repair worn out devices with new equipment and send the machine back to work like new for a fraction of the cost of a new machine.
In some cases it is simply replacing many of the same parts with identical parts just not worn out, bringing the existing design back to life and back to tolerance. Usually we cannot help ourselves and improve things along the way. The end result is a machine made to original design specifications or better with more reliability and throughput at much less cost than a new machine. There is always residual value in your existing machines, and we can make them functional and profitable for years into the future.
Usually the first area suffering from obsolescence is the electronics and computer technology of your equipment. Upgrading control systems typically adds versatility, flexibility and capability. Old controls, especially programmable logic controls have typically been pushed to their limits. Our upgrades can increase processor speeds and add functionality and network capabilities as required, to make your equipment even more functional and capable than it was originally. We do very comprehensive IoT (Internet of Things) and IIoT (Industrial Internet of Things) implementations. With some upgrades, we can give you the ability to check on your machine’s performance real time through your tablet remotely from a different room, city, state or country.
With Sunshine Automation and Tooling on board, you won't have to worry about keeping your existing machinery running, even if the company that originally built it has gone out of business. We can strip your aging machinery down to the floor, and rebuild it with improved parts, electronics and controllers so that it works even BETTER than when it was new. Our trained and capable staff are problem solvers who will work with you to make your machines last a LONG and very productive time.
"I want to express my gratitude for having Sunshine Automation & Tool in our family for the outsourcing of work within our factory. We had utilized Sunshine on multiple projects and have received the same professional deliverables time and time again. Sunshine is precise, Intune, and have been sensitive to our needs every time we have called on them to streamline a project. Not only is their engineering staff one of the best that I have dealt with, there entire staff is the most welcoming an outside individual could ask for. I will continue to utilize Sunshine Tool in the future
and look forward to our future endeavors."
— CHRISTOPHER SCHMIDT
Hours: Mon - Fri 8am – 5pm
7245 16th Street East , Suite 114
Sarasota, Florida 34243
Phone: (941) 351-6330
Copyright © 2018-2020 Sunshine Automation & Tooling. All Rights Reserved. SUNSHINE AUTOMATION & TOOLING and its logo are trademarks and service marks owned by Sunshine Tool, LLC. All other trademarks used on this site are the property of their respective owners. Site design and maintenance by www.DesignStrategies.com.